Home › Drivetrain & Clutch › GM SB 383 c.i. Engine and 700R4 AT 4WD B383FK4WD
Drivetrain & Clutch

GM SB 383 c.i. Engine and 700R4 AT 4WD B383FK4WD

Original price was: $299.99.Current price is: $90.00.

Availability: 7 in stock

🚚 Free Shipping over $59
✓ Premium Quality
🔒 Secure Payments
↻ Money Back Guarantee
SKU: BIRAC682649
CATEGORY: Drivetrain & Clutch
Description

B383FK4WD GM Small Block Compatible 383 c.i. Engine and 700R4 Automatic Transmission 4WD Ready – 405 Horsepower – Truck Edition Builder Series with Polished Pulley Kit – Fuel Injected

*Stock may be limited please call for availability before ordering* *Prices include shipping to a business address with a forklift or loading dock* *Residential addresses or lift gate deliveries please call for a quote*

GM Small Block Compatible 383 c.i. Engine and 700R4 Automatic Transmission 4WD Ready – 405 Horsepower – Truck Edition Builder Series with Polished Pulley Kit – Fuel Injected

SKU:B383FK4WD

Horsepower & Torque:405 Horsepower / 446 FT. LBS. Torque

Cylinder Heads:BluePrint Engines Aluminum Cylinder Heads

Compression Ratio:10:1

Camshaft:Hydraulic Roller Cam –.495 Intake /.502 Exhaust Lift and 220 Intake / 224 Exhaust Duration @.050 – 114° LSA

Pistons:Hypereutectic

Crankshaft:CastCrank – 3.750″ Stroke and 5.700″ Rods

**This package is for an automatic transmission; manual transmissionis pictured as rep image.

  • Horsepower & Torque: 405 Horsepower / 446 FT. LBS. Torque
  • Compression Ratio: 10.0:1
  • Aluminum Heads
  • Hydraulic Roller Cam
  • Cast Crank
  • Hypereutectic Pistons

Block:

  • BluePrint Engines High Strength Cast Iron Block
  • Manufactured and Machined in the USA!
  • 4-Bolt Main
  • 4.000″ Bore
  • 1-Piece Rear Main Seal
  • Mech Fuel Pump Provision: Yes
  • Passenger Side Dipstick
  • Drilled and Tapped for Clutch Linkage

Rotating Assembly:

  • Cast Crankshaft
  • 3.750″ Stroke
  • OEM Type 5.700″ Connecting Rods w/ 150,000 PSI Bolts
  • Hypereutectic Pistons
  • Externally Balanced Front and Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads-H8002K
  • 64cc Chamber
  • 2.02″ Intake / 1.60″ Exhaust Valves
  • 195cc Intake / 75cc Exhaust Runners

Cam Specs:

  • Cam Type: Roller
  • .495 Intake /.502 Exhaust Lift
  • 220 Intake / 224 Exhaust Duration
  • @.050-114 Degree Lobe Separation

Also Includes:

  • Intake Manifold Dual Plane, Satin Aluminum
  • Holley Sniper 2 EFI System
  • Valve Covers
  • Oil Pan
  • Timing Cover
  • EFI Fuel Pump Kit
  • Spark Plugs and Wires
  • Thermostat and Thermostat Housing
  • Oil Filter
  • Plug Wire Separators
  • Polished Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump

Assembled with Complete Transfer Case Ready 700r4 AutomaticTransmission Package:

  • 700R4 Complete Package. Features 4wd 27 Spline Stub Shaft, and Transfer Case Ready, 4wd Case.
  • (Accepts common GM 4 Bolt Transfer Case)
  • 2200-2400 Stall Torque Converter
  • Flex Plate
  • Starter

Recommended Break in Oil:BPP710

Recommended Service Oil:BPP10W30

Recommended Oil Filter:BPP51061

Notes:

  • This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke.
  • Package Ships assembled as pictured.
  • The front accessory drive on this engine fits many vehicles, however it is the customer responsibilityto accuratelymeasure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
  • Due to numerous tire/rear gear combinations, this transmission does NOT ship with a speedometer gear or sender housing.
  • Does not include a 2wd tail housing. Will have extended 4wd output shaft, designed for transfer case to bolt directly to transmission case.
  • The performance aluminum cylinder heads on this engine feature a.500 raised port vs OEM.

Product Information

Scroll to Top