B383K4WD GM Small Block Compatible 383 c.i. Engine and 700R4 Automatic Transmission 4WD Ready – 405 Horsepower – Truck Edition Builder Series with Polished Pulley Kit – Carbureted
*Stock may be limited please call for availability before ordering* *Prices include shipping to a business address with a forklift or loading dock* *Residential addresses or lift gate deliveries please call for a quote*
GM Small Block Compatible 383 c.i. Engine and 700R4 Automatic Transmission 4WD Ready – 405 Horsepower – Truck Edition Builder Series with Polished Pulley Kit – Carbureted
SKU:B383K4WD
Horsepower & Torque:405 Horsepower / 446 FT. LBS. Torque
Cylinder Heads:BluePrint Engines Aluminum Cylinder Heads
Compression Ratio:10:1
Camshaft:Hydraulic Roller Cam –.495 Intake /.502 Exhaust Lift and 220 Intake / 224 Exhaust Duration @.050 – 114° LSA
Pistons:Hypereutectic
Crankshaft:CastCrank – 3.750″ Stroke and 5.700″ Rods
**This packagefeatures a carbureted engine and automatic transmission. EFI and manual transmission pictured as rep image.
- Horsepower & Torque: 405 Horsepower / 446 FT. LBS. Torque
- Compression Ratio: 10.0:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Crank
- Hypereutectic Pistons
Block:
- BluePrint Engines High Strength Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000″ Bore
- 1-Piece Rear Main Seal
- Mech Fuel Pump Provision: Yes
- Passenger Side Dipstick
- Drilled and Tapped for Clutch Linkage
Rotating Assembly:
- Cast Crankshaft
- 3.750″ Stroke
- OEM Type 5.700″ Connecting Rods w/ 150,000 PSI Bolts
- Hypereutectic Pistons
- Externally Balanced Front and Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads-H8002K
- 64cc Chamber
- 2.02″ Intake / 1.60″ Exhaust Valves
- 195cc Intake / 75cc Exhaust Runners
Cam Specs:
- Cam Type: Roller
- .495 Intake /.502 Exhaust Lift
- 220 Intake / 224 Exhaust Duration
- @.050-114 Degree Lobe Separation
Also Includes:
- Intake Manifold Dual Plane, Satin Aluminum
- 750cfm Carburetor
- Valve Covers
- Oil Pan
- Timing Cover
- Fuel Pump
- Spark Plugs and Wires
- Thermostat and Thermostat Housing
- Oil Filter
- Plug Wire Separators
- Polished Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump
Assembled with Complete Transfer Case Ready 700r4 AutomaticTransmission Package:
- 700R4 Complete Package. Features 4wd 27 Spline Stub Shaft, and Transfer Case Ready, 4wd Case.
- 2200-2400 Stall Torque Converter
- Flex Plate
- Starter
Recommended Break in Oil:BPP710 (Click Here)
Recommended Service Oil:BPP10W30 (Click Here)
Recommended Oil Filter:BPP51061 (Click Here)
Notes:
- This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke.
- The front accessory drive on this engine fits many vehicles, however it is the customer responsibilityto accuratelymeasure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
- Package Ships assembled as pictured.
- Due to numerous tire/rear gear combinations, this transmission does NOT ship with a speedometer gear or sender housing.
- Does not include a 2wd tail housing. Will have extended 4wd output shaft, designed for transfer case to bolt directly to transmission case.
- The performance aluminum cylinder heads on this engine feature a.500 raised port vs OEM.