Home › Other › AiM EVO4S Data Logger with CAN/RS232 Hardwire Cable
Other

AiM EVO4S Data Logger with CAN/RS232 Hardwire Cable

Original price was: $299.99.Current price is: $90.00.

Availability: 6 in stock

🚚 Free Shipping over $59
✓ Premium Quality
🔒 Secure Payments
↻ Money Back Guarantee
SKU: BIRAC707983
CATEGORY: Other
Description

The BimmerWorld View – The EVO4S is a fantastic economical part of data-acquisition hardware. With a GPS module and an internal accelerometer included, plus a separate RPM input, you get the basics needed to tune the most important part of your car – the driver! The EVO data loggers are standalone recorders – you don’t need a racing dash to record or review data unless you want it during the sesssion. The EVO data loggers only need ECU or analog data inputs. Export your data logs post-session to review on a laptop with AiM’s RaceStudio software. This is a fantastic entry into data acquisition and analysis without the clutter and distraction of a race dash.

Data can come from multiple sources depending on your vehicle’s age and factory wiring. On OBD-I cars (or 1999-earlier) specific wires to the ECU are tapped and additional analog sensors may be required. For OBD-II (1999-later) cars there is a lot of data avaialble by tapping the vehicle’s CAN High and CAN Low wires and no additional sensors are usually required (for our BMW builds, anyway). A plug-in OBD cable is included with a hard-wired CAN High/Low/K-Line harness and RS232 harness also available. The EVO4S includes the AiM GPS module, a three-axis accelerometer, and a gyro sensor. The EVO4S has 4GB of internal memory with the option of adding a memory card module. Power must come from a hardwired switched connection to the vehicle (power cable included).

EVO4S Layout: Speed Input (not needed if pulling speed from ECU or GPS) Lap Timer/Beacon (not needed if using GPS) ECU (4 meter hardwire CAN/RS232 cable included) Expansion Hub input (or Memory Card) GPS module (included) USB data output port Channel 1-5 analog data input (typically not needed when pulling ECU data) Digital Output (configurable in RaceStudio software to provide 1amp external power).

In The Box: EVO4S, GPS module, 1 CAN/RS232 4 meter cable with open ends, 1 USB data cable, 1 power cable, 1 digital output cable, mounting bracket, Race Studio software CD

Product Information

  • SKUBIRAC707983
  • CategoryOther
Scroll to Top