Availability: 9 in stock
Newparts SKU
1721623
Weight
1.28 lbs
Dimensions (L x W x H)
3.8 x 10 x 6 in
Manufacturer Part #
9716DD
Brand
ACDelco
Manufacturer
ACDelco
MPN
9716DD
Features
Boot Color: Black Boot Type: Solid Coil End Boot Color: Black Core Material: Fiberglass Reinforced Latex Graphite Distributor Coil End Boot Type: Silicone Angled Distributor Coil End Terminal Type: Snap Lock FAQ – Answer 1: Yes. The use of dielectric grease in the boot helps prevent spark flashover and allows easier boot removal in the future. FAQ – Question 1: Should grease be installed into a spark plug boot? Features & Benefits – Bullet 1: Professional, premium aftermarket replacement Features & Benefits – Bullet 2: Provides the performance and dependability you expect from ACDelco Features & Benefits – Bullet 3: Manufactured to meet expectations for fit, form, and function Good Maintenance Practices – Section 1 – Bullet 1: Before purchasing and installing a spark plug wire, make sure they are the correct size and fit for your vehicle. Good Maintenance Practices – Section 1 – Bullet 2: Remove the wire by holding the boot, not the wire. Good Maintenance Practices – Section 1 – Bullet 3: Keep plug wires free from contact with other engine components. Good Maintenance Practices – Section 1 – Bullet 4: Reinstall plug wires in the original position, using correct routing and utilizing appropriate hold downs. Good Maintenance Practices – Section 1 – Bullet 5: Regularly inspect your spark plug wires for signs of damage or wear, and replace them if signs of damage are found. Height (in): 6 Insulation Color: Black Insulation Material: Silicone Insulation Outside Diameter: 0.27 Insulation Outside Diameter: 7 Length (in): 38.2 Length (mm): 970 Maximum Wire Length (mm): 970 Noise Suppression Type: Yes Outside Diameter: 7 Product: ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function. ⚠ WARNING:Cancer and Reproductive Harm – Programming Required: No Resistance: 600 Signs of Wear & Troubleshooting – Section 1 – Bullet 4: Illuminated Check Engine light Spark Plug Boot Material: Hi Temp Silicone Spark Plug End Boot Color: Black Spark Plug End Boot Degree: 180 Spark Plug End Boot Material: Hi Temp Silicon Spark Plug End Boot Quantity Straight: 6 Spark Plug End Terminal Type: Snap Lock Universal Or Specific Fit: Specific Weight (lb): 1.28 Width (in): 10 Wire Separators Included: No
Cross Reference Numbers
88862394, 19170842
Part Type
Spark Plug Wire Set
Fitment
Fitment Type
Vehicle Specific
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2000 | Buick | Century | Custom (3.1 V6 GAS) | |
| 2000 | Buick | Century | Limited (3.1 V6 GAS) | |
| 2000 | Chevrolet | Impala | Base (3.4 V6 GAS) | Notes: without Suppression radio |
| 2000 | Chevrolet | Lumina | Base (3.1 V6 GAS) | Notes: without Suppression radio |
| 2000 | Chevrolet | Monte Carlo | LS (3.4 V6 GAS) | Notes: without Suppression radio |
| 2000 | Chevrolet | Venture | Base (3.4 V6 GAS) | |
| 2000 | Chevrolet | Venture | LS (3.4 V6 GAS) | |
| 2000 | Chevrolet | Venture | LT (3.4 V6 GAS) | |
| 2000 | Chevrolet | Venture | Plus (3.4 V6 GAS) | |
| 2000 | Chevrolet | Venture | Value (3.4 V6 GAS) | |
| 2000 | Chevrolet | Venture | Warner Bros. (3.4 V6 GAS) | |
| 2000 | Oldsmobile | Silhouette | GL (3.4 V6 GAS) | |
| 2000 | Oldsmobile | Silhouette | GLS (3.4 V6 GAS) | |
| 2000 | Oldsmobile | Silhouette | Premiere (3.4 V6 GAS) | |
| 2000 | Pontiac | Grand Prix | SE (3.1 V6 GAS) | |
| 2000 | Pontiac | Montana | Base (3.4 V6 GAS) |