Availability: 6 in stock
Newparts SKU
1667102
Weight
8.2 lbs
Dimensions (L x W x H)
12 x 6.94 x 5.75 in
Manufacturer Part #
337-1157
Brand
ACDelco
Manufacturer
ACDelco
MPN
337-1157
Features
FAQ – Answer 1: Yes. It is included where the design of the starter requires a solenoid. FAQ – Answer 2: Yes. These starters are designed to withstand a wide range of weather conditions. FAQ – Answer 3: No. However a shim may be required at the starter’s mounting surface to align the starter, so the starter drive makes appropriate contact with the flywheel. FAQ – Question 1: Is the solenoid included? FAQ – Question 2: Can I be assured that the unit will last, especially in extreme weather? FAQ – Question 3: Do I always need a starter shim? Family: NDOGR Features & Benefits – Bullet 1: NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality Features & Benefits – Bullet 2: All components are 100% NEW to provide improved performance Features & Benefits – Bullet 3: Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle Features & Benefits – Bullet 4: Key components are greased to ensure long term reliability in harsh conditions Features & Benefits – Bullet 5: All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit Features & Benefits – Bullet 6: Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind Features & Benefits – Bullet 7: Some ACDelco Gold parts may have formerly appeared as ACDelco Professional Features & Benefits – Bullet 8: Premium aftermarket replacement part Features & Benefits – Bullet 9: Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models Good Maintenance Practices – Section 1 – Bullet 1: Check electrical connections, making sure they are kept clean. Good Maintenance Practices – Section 1 – Bullet 2: Make sure all connections to the battery are firmly attached and in good condition. Good Maintenance Practices – Section 1 – Bullet 3: Keeping all connections clean and tight will make sure your starter will crank with full power. Good Maintenance Practices – Section 1 – Bullet 4: It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it. Height (in): 5.8 Length (in): 12.7 Meets or Exceeds Original Equipment Manufacture Specifications: Yes Mounting Bolt Hole Quantity: 3 Mounting Shims Included: No Mounting Type: Flange Nose Cone Material: Aluminum Nose Cone Type: Open Nose Power Rating: 1.88 Product: ACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability even in the toughest conditions. Starters have solenoids that are computer tested for contact life, coil balance, and pull strength, drive gears/clutches assembled under tight specifications for even greater peace of mind. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠ WARNING:Cancer and Reproductive Harm – Programming Required: No Re-Clockable Flange: No Signs of Wear & Troubleshooting – Section 1 – Bullet 1: Engine will not crank Signs of Wear & Troubleshooting – Section 1 – Bullet 2: Engine cranks slowly Signs of Wear & Troubleshooting – Section 1 – Bullet 3: Clunking/grinding noise when starting engine Signs of Wear & Troubleshooting – Section 1 – Bullet 4: Starter will not engage Signs of Wear & Troubleshooting – Section 1 – Header: Indicators that there could be a problem with your vehicle’s starter are: Signs of Wear & Troubleshooting – Section 2 – Bullet 1: Electrical fault Signs of Wear & Troubleshooting – Section 2 – Bullet 2: Loose mounting bolts Signs of Wear & Troubleshooting – Section 2 – Bullet 3: Sticking starter drive Signs of Wear & Troubleshooting – Section 2 – Bullet 4: Damage to flywheel Signs of Wear & Troubleshooting – Section 2 – Header: Other vehicle parts that might cause related starter problems include: Solenoid Attached: Yes Starter Rotation: Clockwise Tooth Quantity: 13 Voltage: 12 VDC Weight (lb): 8.2 Width (in): 7.2
Cross Reference Numbers
3371157
Part Type
Starter
Fitment
Fitment Type
Vehicle Specific
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2006 | Chrysler | 300 | C SRT8 (6.1 V8 GAS) | |
| 2006 | Dodge | Charger | SRT8 (6.1 V8 GAS) | |
| 2006 | Dodge | Magnum | SRT8 (6.1 V8 GAS) | |
| 2007 | Chrysler | 300 | C SRT8 (6.1 V8 GAS) | |
| 2007 | Dodge | Charger | SRT8 (6.1 V8 GAS) | |
| 2007 | Dodge | Magnum | SRT8 (6.1 V8 GAS) | |
| 2008 | Chrysler | 300 | C SRT8 (6.1 V8 GAS) | |
| 2008 | Dodge | Challenger | SRT8 (6.1 V8 GAS) | |
| 2008 | Dodge | Charger | SRT8 (6.1 V8 GAS) | |
| 2008 | Dodge | Magnum | SRT8 (6.1 V8 GAS) | |
| 2009 | Chrysler | 300 | C SRT8 (6.1 V8 GAS) | |
| 2009 | Dodge | Challenger | SRT8 (6.1 V8 GAS) | |
| 2009 | Dodge | Charger | SRT8 (6.1 V8 GAS) | |
| 2010 | Chrysler | 300 | C SRT8 (6.1 V8 GAS) | |
| 2010 | Dodge | Challenger | SRT8 (6.1 V8 GAS) | |
| 2010 | Dodge | Charger | SRT8 (6.1 V8 GAS) |