Availability: 9 in stock
Brand: Tilton Engineering
| This item qualifies for FREE Shipping in the continental United States! |
This direct-acting throwout bearing eliminates all lost motion due to cable stretch or linkage flex. The low profile (2.32″ – 2.37″ setup height*) makes it small enough to be adapted to many different installations. Most applications will require fabrication of an adapter plate.
The radius-faced bearing has a 38mm contact diameter for clutches with 13/8″ diaphragm spring hole, including Tilton OT-V (4.5″) clutches, Tilton OT-III (5.5″) Clutches, and certain AP 5.5″ carbon clutches (CP6913, CP6914, and CP7543 only).Maximum travel is 0.70 inches, so a clutch pedal stop must be used to prevent damage to the clutch and the engine. Tilton recommends pairing this assembly with a 5/8″ bore master cylinder (sold separately).
We also stock the Hydraulic Release Bearing Replacement 38mm Bearing (Part No. TE 62-008) and Tilton Hydraulic Release Bearing Rebuild Kit (Part No. 163-51).
* A 0.05″ shim under the bearing can be removed to change the height from 2.37″ (as supplied) to 2.32″ if needed.