Home › Body & Lighting › Rogue Engineering RACP Chassis Brace Kit – E46 3-Series
Body & Lighting

Rogue Engineering RACP Chassis Brace Kit – E46 3-Series

Original price was: $109.80.Current price is: $32.94.

Availability: 7 in stock

🚚 Free Shipping over $59
✓ Premium Quality
🔒 Secure Payments
↻ Money Back Guarantee
SKU: BIRAC682867
CATEGORY: Body & Lighting
Description

This bolt-in rear chassis brace will link the shock towers to the rear subframe on E46 3-series coupe and sedan models (1999-2006). Adding this Rogue Engineering RACP rear chassis brace will strengthen the chassis, reducing subframe movement, and minimizing the possibility of damage to the structure of your BMW E46 track car.

Kit includes RACP rear brace with black coating, drill guide, special drill bit, hole saw, and your choice of stainless-steel or titanium mounting hardware.

Installation: Installation can be performed by the shop already doing your subframe repair and reinforcement with some additional labor. However, if this has already been done, the installation can be done in a few hours as a DIY project. Installation can take approximately 3-5 hours, depending on the tools and resources available. A few key things to note;

  • Access to the underside of the car is required. Removal of the exhaust is also required.
  • Removal of the subframe carrier (and differential) is NOT required.
  • Someone to assist with the installation would be helpful

Removal: Once installed, removal or re-installation of the reinforcement bar is very easy and straight forward and can be done from the inside of the trunk within minutes. Unlike some designs in the market, since the brace and strut tower brackets are separate, it is easy to disconnect. Removing/reinstalling the x-brace should take no more than 10 minutes with simple hand tools.

  • Two nuts holding down the bottom of the reinforcement brace need to be loosened and removed using a deep socket and a magnetic grabber tool.
  • The four bolts/nuts attaching the reinforcement brace to the strut tower brackets can be loosened and removed.
  • Once the hardware is removed, the reinforcement brace can be tilted backwards and lifted out of the trunk area.

BMW Fitments:

3 Series E46 (99-05) > 320i E46 (99-05) > 323Ci E46 (99-05) > 323i E46 (99-05) > 325Ci E46 (99-05) > 325i E46 (99-05) > 328Ci E46 (99-05) > 328i E46 (99-05) > 330Ci E46 (99-05) > 330i E46 (99-05) > M3

Product Information

Scroll to Top